Parts Compatibility with other Lancia Models
This section has been added to help owners use parts from generally later built Lancia models, which have parts that were first used on the Aurelia. Study of the Aurelia parts books will also show parts that were used on earlier models such as the Aprilia. In the Table below the column ‘Origin model’ is the one found in the parts books that indicates on which model the part was first introduced. These codes for the Aurelia are as follows together with others used in the table below:
| 800 | B10 |
|---|---|
| 800.01 | B10S |
| 801 | B12 |
| 801.01 | B12S |
| 803 | B20 |
| 803.01 | B20S |
| 804.02 | B22 |
| 805 | B24 |
| 805.01 | B24S |
| 818-S2 | Fulvia Series 2 |
| SII | De Dion Aurelias |
| SI | Coil Spring Aurelias |
| II | 2nd part of SII parts book, for B20s from 2952 |
| III | 3rd part of SII parts book, for B24s |
Note that the prefix ‘8’ is not added to the parts numbers, as was done from 1st Jan 1972. This is to avoid confusion using the Aurelia parts books. The table is sorted by Origin model, and then by part number.
| Origin model | Part Number (Old style no.) | Lancia Model – Parts Table (Tav) – Part in diagram (#) | Description for later model | Aurelia Model – Parts Table (Tav) – Part in diagram (#) | Description for Aurelia where different from later model |
|---|---|---|---|---|---|
| 800 | 2103959 (B10-20929) | 818-S2 Tav.31 #32 | Gearbox thrust washer in speedo drive | SII Tav.30 #40, 30bis (II, III) #46 | All SII models |
| 800 | 2125808 (B10-1029A) | 818-S2 Tav.9 #28 | Rubber buffer – engine support | SII Tav.9 #13 | All models, upper, large engine support buffer x4 |
| 800 | 2127169 (B10-62061) | 818-S2 Tav.48 #5 | Cone on steering rod clamp & on Panhard rod | SII Tav.48 #3; 48(II, III) 53 | All SII models |
| 800 | 2128250 (B10-76210) | 818-S2 Tav.73A #30 | Spring in boot catch | SII Tav.61 #18, 63 (III) | 1. # 18 - Spring for bonnet catch on bonnet – All SII models 2. For B24 Boot lid |
| 800 | 2128270 (B10-76235) | 818-S2 Tav.71 #20 | Spring in landing catch for bonnet | SII Tav.61 #19 | All SII models |
| 800 | 2128285 (B10-97346) | 818-S2 Tav.71 #22; 71A #27; 71B #27; 71C #19; 80 #63 for saloon door release | Bolts with hole at each end of bonnet release cable | SII Tav.61 #25, 63 #26, 70bis (II-III) #35 | #25 – bonnet release cable all models #26 – boot release cable #35 – cable for air vents on B20/B24 Series 5 & 6 |
| 800 | 2128490 | 818-S2 Tav.61 #22 & 23 | Springs in push switches for bonnet, boot & lights | ||
| 800 | 2128510 (B10-87079) | 818-S2 Tav.18 #18 | Choke cable insulator | SII Tav.58 #27, 58 (III) #27, 61 | Choke lever insulator B12, B24 |
| 800 | 2128512 (B10-87080) | 818-S2 Tav.18 #3 | Choke cable bush | SII Tav.58 #2, 58 (III) #27, 61 #2 | 1. Choke lever 2. Bush in bonnet light contact x2 |
| 800 | 2128905 (B10-97358) | 818-S2 Tav.73A #50 | Bolt to fix boot support to boot lid | SII Tav.63 (III) | B24 boot lid lower fixing bolt |
| 800 | 2157500 (00.520.601) | 818-S2 Tav.63A #13 | Spring in Carello head-light support | SII Tav.58 (II-III) #33 | Carello 00.520.601 for USA B20/B24 cars |
| 800 | 2158618 (B10-5101/15 (F)) | 818-S2 Tav.12 #11 | Spring in fuel pump Fispa 8801125 | SII Tav.13bis #13 | All SII models |
| 801 | 2133668 (B12-96612/1) | 818-S2 Tav.77A | Spring in window winder knob | SII Tav.66, 66 (II), 67 | B12 front & rear window winders, B20 front winders |
| 801 | 2162859 (B12-5011A/1S) | 818-S2 Tav.13 #32 | Throttle butterfly Solex 6.100.007 | SII Tav.14 #16 | Solex C35-PAAI carburettor for B12 |
| 801 | 2162866 (B12-5011/124) | 818-S2 Tav.13 #60 | Accelerator pump spring Solex 6.720.004 | SII Tav.14 #43 | Solex C35-PAAI carburettor for B12 |
| 801 | 2162871 (B12-5011/127) | 818-S2 Tav.13 #74 | Wash/lock-washer Solex 6.730.007 | SII Tav.14 #52 | Solex C35-PAAI carburettor for B12 |
| 803 | 2129923 (B20-20957) | 818-S2 Tav.31 #33 | Gearbox thrust washer in speedo drive | SII Tav.30bis (II-III) #47 | B20 Series 5 & 6 |
| 805 | 2131562 (B20-97249/1) | 818-S2 Tav.74A #31 | Washer with Ring nut holding key housing to boot lid | SII Tav.60 (III), 63 (III) #40, 66 (II-III) #62 | 1. Washer with ring nut holding key housing to fuel filler lid 2. With LH door lock up to B24S-1182 & all SII B20 locked doors |
| 805 | 2136539 (B24-97305/1) | 818-S2 Tav.74 #11; 74A #13; 74B #25 | Ring nut holding key housing to boot lid | SII Tav.60 (III), 63 (III) #40 up to B24S-1452 | Ring nut holding key housing to fuel filler lid for B24 |